The Italian building stock consists of buildings mainly constructed until the mid-20th century using pre-industrial construction techniques. These buildings require energy refurbishment that takes into account the preservation of their architectural heritage. In this view, this work studies an innovative …
Energy efficiency and environmental sustainability in building has become a key issue since the built environment is nowadays responsible for more than 30% of the total carbon emissions. While new building design and construction reached massive improvements toward net zero …
The economic and environmental performance of a district heating (DH) system is to a great extent affected by the size and dynamic behavior of the DH load. By implementing energy efficiency measures (EEMs) to increase a buildings thermal performance and …
According to the recent EU Directives on building energy efficiency, the Italian government is paying particular attention to energy refurbishments of buildings by enacting energy measures and obtaining significant results. In particular, the Italian government is providing economic incentives to …
Single-family houses (SFHs) constructed between 1961 and 1980 account for approximately one-third of the total energy use, 31 TWh, for space heating and domestic hot water in Swedish SFHs. These are responsible for about 40 percent of the total energy …
This paper aims to identify some optimal system solutions for the energy refurbishment of a specific historic building, through energy simulations in dynamic conditions performed with a suitable software. The analysis is carried out by the evaluation of energy requirements …
Two infrared reflective coatings recently developed as part of the EFFESUS European research project are characterized and evaluated in this paper. Thermal performance, durability, compatibility with historic fabric, and reversibility are all analysed. The results of extensive research that include …
In the light of EU’s requirements to achieve a major cut in energy use by 2050, Sweden has the same target. The built environment must by 2020 reduce energy use by 20 and 50 % by 2050. The size of …
Current energy consumption estimates for building stocks rarely use measured data. Calculated data of supposed representative buildings are extrapolated to a wider building stock. Conclusions drawn about supposed similar energy consumption levels risk being misleading when considering older buildings. The …
Radiation influence on commonly used temperature sensors for measuring indoor air temperatures can be significant, especially at the typically low air velocities occurring indoors. Conceptually, a physical sensor may not read the true air temperature, it only reads its own …